Arrow Starline Galvanised Steel Plaster Stop Bead 3000mm x 13mm (Pack of 50) - BEPS313

Arrow Galvanised (internal use) and stainless steel (external use) Plaster Stop Beads for use on traditional wet 2 / 3 coat plaster application.

• Available in 2.4m and 3.0m lengths in galvanised finish and 3.0m lengths in stainless steel finish
• Plaster Stop Bead is used to provide a precise straight clean finish and also to reinforce 2 or 3 coat plaster or render on its edge
• Locusrite Plaster Stop Bead is available in four sizes for varying thickness of plaster depth - 10, 13, 16 and 19mm
• Galvanised for internal use or stainless steel for external use

• All galvanised materials are manufactured from steel to DX51.BSEN 10142 (g 275)
• Manufactured in accordance with BS6452 Part 1: 1984

• The installation of Arrow beads should be in accordance with BS 5492:1990 (internal) and BS 5492:1991 (external)
• The most appropriate Arrow bead should be chosen to suit the application, required plaster/render depth and desired finish
• Beads should be fixed using plaster dabs or mechanical fixings at a maximum of 600mm intervals
• Beads can also be fixed to lath sheets by the use of galvanised or stainless steel tye wire
• Use tinsnips to cut the bead wings and a fine toothed saw to cut the nosing
• Care should be taken to ensure that steel beads are kept dry, and stored and handled in a way to prevent distortion and general damage, especially to the galvanised coating
• This means storing them off the ground on a flat surface
• The risk of corrosion in galvanised beads will normally only become apparent during the initial drying out period of the plaster, which should be kept to an absolute minimum (maximum 5-7 days), and subsequently during periods of heavy condensation and dampness
• All metal components used in a particular installation must be of all the same material type, i.e stainless fixings with stainless beads/sheets and galvanised fixings for galvanised bead/sheets
• In external applications and in conditions where heavy condensation, persistent damp or regular exposure to moisture are likely, stainless steel or PVC-U beads must be used
• Stainless steel beads are for use with cement based renders and not for use with gypsum based plasters unless they are specified with an approved protective finish