K Rend Alkali Resistant Reinforcing Mesh 55m - J008

The material is manufactured from specially woven glass-fibre mesh fabric with specially designed mesh surface treatments to produce an alkali resistant, flexible mesh for use in any Portland cement, Hydraulic Lime, Acrylic or Latex based stucco, mortar or surfacing material. (55m roll) is used to reduce the build up of stress at typical stress points in the building, this minimises the potential for cracking. Used to reinforce the base coat Simple to install Used with all K Rend one-coat renders Alkali resistant Improves crack resistance Helps accommodate building movement Improves impact resistance Must be used for product/system warranty Specification: Construction: ASTM D-3775 4.7 x 2.2 strands/cm Thickness: 0.52mm Opening size (wrap x weft): Measured 3.5mm x 3.8mm Tensile Strength: EN ISO 13934-1 2000 / 2100 N/50mm Elongation at break: EN ISO 13934-1 3.5% (average) Burst Strength (Mullens): ASTM D-3786 760 kPa. Flame Spread Index: ASTM E-84 10 Weight/Square Metre: 160 g/m2 Width: 1.1m (+-10%) Length: 50m Stiffness: ASTM D-1388 3800mg/cm