Pump or hand applied one coat render. weberend OCR avoids the drying time associated with multi-coat render systems and offers results equivalent to traditional two coat renders.
weberend OCR is a premixed sand and cement render which is suitable for rendering brickwork, blockwork, and concrete, among other suitably prepared substrates.
Resists the penetration of external water and has excellent weather resistance and durability, whilst allowing the structure to breathe
Suitable for hand or machine application
Factory batched for consistency
Scratch coat render
Gives the same final appearance as a traditional sand and cement render mix but in significantly less time
Can be used a base for a number of Weber decorative finishes
Things to Consider:
Do not apply to gypsum plaster or previously painted surfaces
Seek advice before rendering onto common brick
Do not apply if frost is forecast within 24 hours of use
Do not apply in damp or wet conditions
Do not apply in direct sunlight or where the substrate is hot
Do not apply in temperatures below 5°C or above 30°C
Not suitable for application onto elevations in direct sunlight or where the substrate is hot
When stored unopened in a dry place at temperatures above 5°C, shelf life is 12 months from the date of manufacture printed on the side of the bag