A single coat render applied in two passes means fast application with shorter programme periods, reduced scaffolding and site costs, as well as earlier completion of ground works.
weberpral M is a weather-resistant exterior render and is ideal for new build or refurbishment projects. Monocouche can be used to produce a range of finishes:
Scraped
Sprayed roughcast
Dry dash
Can be used to create ashlar and quoin features, and is suitable for use on entire elevations, feature panels or smaller areas such as garden walls.
Single coat for fast application and shorter programme periods
Formulated to be spray applied by render pump for faster application
Coloured render for low maintenance with no further decoration required
Can be used to create a scraped or roughcast render finish
Weather and algae-resistant
BBA approved certificate no. 17/5464
Accepted by the NHBC in relation to NHBC standards
Things to Consider:
Do not apply if frost is forecast within 24 hours of use
Do not apply in damp or wet conditions
Do not apply in temperatures below 5°C or above 30°C
Do not apply in direct sunlight or where the substrate is hot
Not suitable for use on construction board substrate (concrete particle board/render board), use weberend MT
Not suitable for use on insulation board substrate, use webertherm XP
When stored unopened in a dry place at temperatures above 5°C, shelf life is 12 months from the date of manufacture printed on the side of the bag