Arrow Metal Corner Tape Platinum Range 30m x 51mm - A8

Cut tape to size. Apply jointing compound on both sides of the corner angle. Fold the tape at the centre margin and press over the compound with the metal strips facing the wall. Remove excess compound and allow drying. Apply your finish coat and feather into the wall. After the finish coat has dried sand lightly if needed. Please ensure the appropriate PPE is used when preparing, mixing and applying products. Always wash hands before consuming food and make sure that materials are kept safely out of reach from children and animals. Please dispose of packaging and waste appropriately. Avoid contact with skin. Prolonged use may cause some irritation to skin. If swallowed seek medical advice immediately. Use only in ventilated areas.