Flex Giraffe Wall and Ceiling Sander GE6 and VCE 33 Kit.

Giraffe sander GE6

With wear-free disk brake for controlled contact with the surface to prevent damage
A very flat, gimbal-mounted sanding head with a swivel range of 160° enables high flexibility and optimum adjustment when sanding on walls and ceilings
The sanding head with the innovative backing pad adapts very well to the surface being sanded, and delivers a noticeably improved sanding feel. The great flexibility of the Giraffe® means that no unnecessary pressure needs to be applied in order to achieve optimum results
Brushless motor with greater efficiency and a longer service life
Variable speed, levels from 1-6 with Power Control LED indicator
The innovative, textile transport system allows the machine and accessories to be transported effortlessly. The Giraffe® does not have to be mounted and is immediately ready for use
According to the assortment of sanding paper ideally suited for sanding plaster boards, solid styropor insulation slabs, preparation for painting
Very effective suction extraction thanks to a special hole pattern in the backing pad prevents clogging of the sanding pad to ensure dust-free working
Very flexible thanks to an optional 500 mm extension (accessory) for high rooms, can be attached without any tools
Connection option for the FLEX safety vacuum cleaners with flow rate optimisation on the guide tube with the FLEX clip system, anti-static in conjunction with an antistatic suction hose.
Dust-proof on/off switch
 
Safety vacuum cleaner VCE 33 M AC
Adapter plate that can be installed without using tools, for fixing L-BOXX and Tanos systainers on the head of the vacuum cleaner
The high-performance turbine ensures both a high suction capacity and a high vacuum. The outcome is an excellent extraction result
Continuous automatic flat filter cleaning ensures no loss of suction
The flat-fold filter with Teflon coating / nanocoating allows optimum use of the tank volume
With permanent socket and electronic automatic on/off switch
Flow sensor technology monitors the flow rate and emits a visual and audible signal to indicate any drop below the statutory minimum value of ≤ 20m/s
The flow rate control via the rotary switch minimises possible vacuums on the surface during intermediate and finish sanding
Suction diameter selector switch for adjusting the optimum flow rate
Suitable for wet vacuuming: with electronic liquid level control
Soft start stops any voltage peaks at the start and the run-on feature (15 sec. overrun) empties any remaining dust in the vacuum hose
Double-walled sturdy container with integrated grip recess for emptying the container easily
Dust-protected antistatic finish prevents electric charging of the suction hose
Equipped with large wheels and two swivel guide rollers made of metal
Separate motor air cooling duct with coarse dirt filter. Protects the turbine against the ingress of ambient air and thereby extends the service life. (Fine dust filter PES available as an accessory)
Simple filter change without removing the suction head
With hose retainer and expander for easy, quick securing of the power cable
With 4 clamping loops (2 on each side ) for attaching straps and a giraffe holder
Recommendation: When working with a filter bag turn off the automatic cleaning system. When using a disposable bag leave the system on
Class M safety vacuum cleaner, suitable for all dusts with OEL values ≥ 0.1 mg/m³. Specifically for mineral and timber dusts (also beech and oak)