Flex Safety Vacuum Cleaner with Manual Filter Cleaning System 20 Litre Class M VCE 22 M MC V 530.920

• The high-performance turbine ensures both a high suction capacity and a high vacuum. The outcome is an excellent extraction result
• By actuating manual filter cleaning, dust deposited in the filter element is removed by a targeted blast of air
• Level monitor, no malfunctions when drawing in liquids thanks to installed float valve
• With appliance socket and electronic automatic switch on/off
• Soft start stops any voltage peaks at the start and the run-on feature (5 sec. overrun) empties any remaining dust in the vacuum hose
• With accessories magazine for suction nozzles and suction tubes on the back
• Equipped with large wheels and two swivel guide rollers
• Features a filter bag made of highly tear-proof fleece for optimum filling. The extracted dust can be disposed of without difficulty
• Selector switch suction diameter of 32 mm or 21 mm to adjust the optimum flow rate
• The flow rate control via the rotary switch minimises possible vacuums on the surface during intermediate and finish sanding
• Dust-protected antistatic finish prevents electric charging of the suction hose
• Class M safety vacuum cleaner, suitable for all dusts with OEL values ≥ 0.1 mg/m³. Specifically for mineral and timber dusts (also beech and oak)
• Flow sensor technology monitors the flow rate and emits an audible signal to indicate any drop below the statutory minimum value of ≤ 20m/s

Includes:

• 1x Antistatic suction hose

Specifications:

• Power consumption: 1200 W
• Voltage: 230 V
• Frequency: 50/60 Hz
• Vacuum cleaner flow rate: 3700 l/min
• Max. vacuum: 24500 Pa
• Tank volume: 20 L
• Equipment socket: Yes
• Automatic switch-on, power tools: Yes
• Suction power control: Mechanical
• Hose length: 3.5m
• Cable length: 7.5 m
• Dimensions WxLxH: 377 x 387 x 506 mm
• Weight: 9.5 kg